background image

 

- 14 - 

 

Folded Di-Pole - This is the most common and simplest of all antennas, most 
people are familiar with the 79 cent piece of wire you received with most 
electronics gear (generally provided with a tuner or receiver). This piece of wire is 
bi-directional and the performance of it is affected by the angle that the signal hits 
the piece of wire. There are quite a number of di-pole antenna designs; they work 
well in areas of strong signal strength, such as local stations.  

Magnum Dynalab offers the SR-100 as a good folded di-pole.  

 
There are many styles of antennas but all of them are based on one of these 
types. 
 

FM RECEPTION AIDS AND ACCESSORIES 

 
We have already alluded to the importance of a good quality antenna which has 
been designed and built with the reception of the FM bandwidth exclusively.  

SHOULD YOU ENCOUNTER A SITUATION IN WHICH YOU REQUIRE MORE GAIN 
TO THE FM SIGNAL OR SITUATIONS WHERE YOU MAY NEED LESS GAIN AND 
BETTER SELECTIVITY THEN THE MAGNUM DYNALAB 205 “SIGNAL SLEUTH” 
MAY BE OF BENEFIT TO YOU.  

 

THE 205 IS A FM SIGNAL PROCESSOR/AMPLIFIER DESIGNED SPECIFICALLY FOR 
FM. IF YOU WOULD LIKE MORE INFORMATION ON THIS ITEM, PLEASE FEEL 
FREE TO CONTACT US AT ANY TIME. CALL US TOLL FREE 1-800-551-4130, 
EMAIL US AT 

[email protected]

 OR VISIT US AT 

WWW.MAGNUMDYNALAB.COM. 

Summary of Contents for MD 05TR


















Reviews: