MC-35M
1
Chapter 2 SAFETY
Before or while operating this machine, you should pay great attention to the
safety.
2.1 Environment
Temperature
：
10°C to 35°C
Humidity: 30% to 70%
Altitude: Below elevation 1000m
There is no corrosiveness gas, flammable gas, oil mist and so on in room
2.2 Do’s and Don’ts
Do
-Read this manual and fully understand before the operation.
Do
-Check the
plug
and
machine voltage and frequency
to your main
supply, and that the socket has a correct working earth lead for this single
insulated machine
Do
-use at least a 10 amp power source at 220 V. (20Amp/100V).
Do
-make sure all
safety covers
are in place. The top covers have an
interlock switch which will disable the unit if removed
Do
-open or close the cover slowly
Do
- contact the local maintenance center before you are about to move
the machine.
Do
-disconnect the power before clean the inner side.
Do-
unplug the cord if you won’t use the machine for a long while,
Do-
Be careful of the blade edge
Don’t
-install the machine on an unstable ground.
