Magnum Dynalab MD 301 Instruction Manual Download Page 14

-  - 

 

14

LIMITED WARRANTY 

Register your product at www.magnumdynalab.com 

 
 

Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees this 

product to be free of defect in both material and workmanship and agrees to 
remedy any such defect or replace any defective component at no charge for a 
period of two years from date of sale to the first end user. This warranty is void if 
the product has been found to be subjected to misuse, abuse, lightning strike, 
unauthorized service, damaged in transit or has been altered or repaired in such a 
way as to detract from its performance, reliability or its safe operation. 
 

Should such defect be discovered and it falls within the terms of this guarantee, 

the manufacturer will correct the defect in workmanship and/or replace any 
defective component with a new one of same or better capability and value. This 
warranty does not apply to the cabinet or appearance items such as the faceplate, 
control knobs or meter lenses nor does it cover any expenses in shipping the unit to 
the appropriate service depot.  
 

The foregoing is in lieu of any other warranties expressed, implied or statutory 

and the manufacturer neither assumes nor authorizes any person to assume for it 
any other obligation or liability in the connection with the sale of this product. This 
warranty is not transferable except by written authorization from the manufacturer.  
 

In order to qualify under the terms of the above warranty, all items must be 

returned to the appropriate factory service depot with all shipping charges prepaid 
in lieu of having previously registered the purchase of the unit by completing and 
returning the attached 

Registration Card

, the unit must be accompanied by proof 

from an authorized Magnum Dynalab Ltd. dealer.   
 
*All tubes are covered for 12 months.  
 
YOUR LOCATION 

RETURN SHIPPING ADDRESS 

Within the USA 

Magnum Dynalab C/o Trans American 
2775 Broadway  
Buffalo, NY  
14227-1043 
1-800-551-4130 

Within Canada 

Magnum Dynalab Ltd.  
8 Strathearn Avenue, Unit # 9 
Brampton, ON, Canada 
L6T 4L9 
PHONE: 1-800-551-4130 

Other Countries 

Contact selling dealer 

 
TO PREVENT FIRE SHOCK OR HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN 
OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

Summary of Contents for Dynalab MD 301
















Reviews: