10
a.
Loosen the clamping screw of the deflection yoke to allow the yoke to tilt.
b. Put a wedge as shown in Fig.8 temporarily. (Do not remove the cover paper on the adhesive part of the wedge).
c.
Tilt front of the deflection yoke up or down to obtain better convergence in circumference. (See Fig.10).
Push the mounted wedge into the space between the picture tube and the yoke to hold the yoke temporarily.
d.
Put another wedge into bottom space and remove the cover paper to stick.
e.
Tilt front of the yoke right or left to obtain better convergence in circumference. (See Fig. 10).
f.
Keep the yoke position and put another wedge in either upper space. Remove the cover paper and stick the
wedge on picture tube to hold the yoke.
g. Detach the temporarily mounted wedge and put it in another upper space. Stick it on the picture tube to fix the
yoke. After fixing three wedges, recheck overall convergence.
h.
Tighten the screw firmly to hold the yoke tightly in place. Stick 3 adhesive tapes on wedges as shown in Fig. 8.