INTERNATIONAL END USERS:
Warranty is furnished by
authorized Magnum dealers or distributors only; and the
warranty may vary depending on the dealer or distributor and
may be different from Magnum’s warranty; please consult
distributor for details.
HOW TO OBTAIN WARRANTY SERVICE:
1. Contact your local service dealer and return the Magnum
washer or part within the warranty period along with your
sales receipt. To locate service, call customer service at
(772)461-4486
or go to
www.magnumpressurewashers.com
2.
You also have the option to obtain a return goods
authorization and ship the questionable part freight prepaid
directly to the manufacturer. The part will be evaluated upon
receipt. If found defective, manufacturer will repair or replace
part under the conditions of warranty and return to you.
3.
If the defective component is an engine or motor made
by another manufacturer, we, or your authorized Magnum
dealer, can help you obtain warranty service through the
specific manufacturer’s local authorized service center.
4.
If you are unable to resolve the warranty claim, write to
Magnum Pressure Washers c/o Pressure-Pro, 7300
Commercial Circle, Fort Pierce, FL 34951 USA, Attn.:
Technical Services. Please enclose a copy of the dated
purchase receipt and explain the nature of the defect.
EVAPORATIVE EMISSION CONTROL STATEMENT
The
U.S. Environmental Protection Agency and
M
agnum are
pleased to explain the evaporative emission control
system (EECS) warranty on your 2017 model year or
newer pressure washer. New equipment that uses small
off-road engines must be designed, built, and equipped
to meet California anti-smog and also U.S. EPA
standards.
Magnum
must warrant the EECS on your
pressure washer for the period of time listed below
provided there has been no abuse, tampering, neglect or
improper maintenance.
Your EECS may include parts such as the carburetor, fuel-
injection system, the ignition system, catalytic converter, fuel
tanks, fuel lines, fuel caps, valves, canisters, filters, vapor
hoses, clamps, connectors, and other associated emission-
related components.
MANUFACTURER’S WARRANTY COVERAGE:
This evaporative emission control system is warranted for
two years. Where a EECS component is defective and a
warrantable condition exists, Magnum will repair your
pressure washer at no cost to you including diagnosis,
parts and labor.
GENERAL EMISSIONS WARRANTY COVERAGE:
Subject to certain conditions and exclusions as stated below,
the warranty on emission-related parts is as follows:
(1) Any warranted part that is not scheduled for replacement
as required maintenance in the written instructions supplied,
is warranted for the warranty period stated above. If the part
fails during the period of warranty coverage, the part will be
repaired or replaced by Magnum, according to subsection
(4) below. Any such part repaired or replaced under
warranty will be warranted for the remainder of the period.
(2) Any warranted part that is scheduled only for regular
inspection in the written instructions supplied is warranted for
the warranty period stated above. Any such part repaired or
replaced under warranty will be warranted for the remaining
warranty period.
(3) Any warranted part that is scheduled for replacement as
required maintenance in the written instructions supplied is
warranted for the period of time before the first scheduled
replacement date for that part. If the part fails before the first
scheduled replacement, the part will be repaired or replaced
by Magnum according to subsection (4) below. Any
such part repaired or replaced under warranty will be
warranted for the remainder of the period prior to the first
scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the
warranty provisions herein must be performed at a warranty
station at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services
or repairs will be provided at all of our distribution centers that
are franchised to service the subject engines or equipment.
(6) The Pressure Washer owner will not be charged for
diagnostic labor that is directly associated with diagnosis of
a defective, emission-related warranted part, provided that
such diagnostic work is performed at a warranty station.
(7) Magnum is liable for damages to other engine or
equipment components proximately caused by a failure
under warranty of any warranted part.
(8) Throughout the Pressure Washer warranty period stated,
Magnum will maintain a supply of warranted parts sufficient
to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of
any warranty maintenance or repairs and must be provided
without charge to the owner. Such use will not reduce the
warranty obligations of Magnum.
(10) Add-on or modified parts that are not exempted by the
Air Resources Board or U.S. EPA may not be used. The use
of any non-exempted add-on or modified parts by the
ultimate purchaser will be grounds for disallowing a warranty
claims. Magnum will not be liable to warrant failures of
warranted parts caused by the use of a non-exempted
add-on or modified part.
WARRANTED PARTS:
The following emission warranty parts list are covered (use
portions of this list applicable to your pressure washer: Fuel
Tank, Fuel Cap, Fuel Line, Fuel Line Fittings, Clamps,
Canister Mounting Brackets, Carbon Canister, Vapor Hoses,
Vapor Hose Clamps
USE ONLY MAGNUM CERTIFIED ORIGINAL
EQUIPMENT REPLACEMENT PARTS, FAILURE
TO DO SO COULD LEAD TO WARRANTY
EXCLUSION AND SEVERE BODILY INJURY
15
