Magnum Industrial MI-92100, Operating Manual

Page: 4 / 21

10. Made sure that the saw blade teeth point downward toward the table.
11. Adjust upper guide to just clear work piece.
12. Disconnect machine from the power source when making repairs.
13. Replace all guards after servicing.
14. Turn off band saw if the material is to be backed out of an uncompleted cut.
15. Make relief cuts before cutting long curves.
16. Do not cut material that is too small to be safely supported.
17. Support long heavy work from the floor.
18. Before leaving the machine, make sure the work area is clean.
19. Important: When the tool is not in use , the switch should be in the “OFF” position
and the power cord disconnected.
20. Do not remove jammed cutoff pieces until blade has stopped.
ON-OFF SWITCH PADLOCK – To safeguard the band saw from unauthorized
operation and to avoid accidental starting by children or other not qualified to use, the
use of padlock is required. To lock out the on – off switch, open the padlock, insert
through the hole of the switch on button and close the padlock. Place the key in a
location that is inaccessible to children and other not qualified to use the tool.
SWITCH WITH KEY – The switch key must be inserted into the switch before saw can
operate. To lock the switch in the OFF position, remove the switch key from the switch.
Place the key in a location that is inaccessible to children and others not qualified to use
the tool.
GROUNDING INSTRUCTIONS
1. All grounded, cord-connected tools:
In the event of a malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This tool is equipped with an electric cord
having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into a matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a
qualified electrician.
Improper connection of the equipment-grounding conductor can result In a risk of electric shock.
3