Magnum Industrial MI-91600, Operating Manual

Page: 10 / 27

Adjusting lower blade support bearing
The lower bearing adjustments are similar to the
upper bearing adjustments. The blade support
bearing (A) should be adjusted so it almost touches
the back of the saw blade. To adjust, loosen hex
screw (B) and slide bracket in or out until the
adjustment is correct. Tighten screw. The blade
guide bearings (C) should be adjusted so they
almost touch the sides of the blade. To adjust,
loosen hex screw (D) and slide bearing assembly in
or out until the adjustment is correct. Tighten hex
screw.
9