4
Specifications for Grinders
Motor and Electricals
Motor type
Totally enclosed industrial
Horsepower
1 HP
Motor phase
Single
Motor voltage
115/230 V (prewired 115V)
Cycle
60 Hz
Listed FLA (full load amps)
11 / 5.5 A
Motor speed
1,750 RPM
Start capacitor
400MFD 125VAC
Run capacitor
45
F 350VAC
Power transfer
Direct drive
On/off switch
Push button w/ power indicator and safety key
Power cord
SJT 16AWGx3C, 6 ft.
Power plug
5-15P, 125V/15A installed
Recommended circuit size
1
15 A
Sound emission
2
80 dB at 3ft. without load
Base
Footprint, L x W
35-7/16 x 16-15/16 in. (900 x 430 mm)
Mounting hole dimensions
Dia. 7/16 in. (11mm)
Belt Grinder
Belt included, L x W
50 grit; 72 x 2 in. (1829 x 50.8 mm)
Belt speed, SFPM
4,600
Contact wheels included, Dia. x W
1-1/2 x 2 in. (38 x 50.8 mm) smooth 3
x 2 in. (76.2 x 50.8 mm) smooth
8 x 2 in. (203.2 x 50.8 mm) serrated
Dust port diameter
3 in. (76.2 mm)
Main materials
Frame
Steel
Contact wheel, 8-inch
Rubber, 90 Durometer
Contact wheel, 3 x 2-inch
Rubber, 70 Durometer
Contact wheel, 1.5 x 2-inch
Rubber, 70 Durometer
Idler wheel
Rubber
Drive wheel
Aluminum
Platen
Steel
Head casting
Cast iron
