-4-
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this machine.
Addit iona l Safety Rules For T he E dge Sander
Before you turn on the machine, be sure every-
one is clear of the machine. Keep hands away
from the abrasive belt.
Never take off safety guards.
Make certain the abrasive belt is not torn or
loose.
When you turn on the machine, please make
sure whether the machine’s rotation direction
is correct or not? It should be the same as
marked on the machine label. If not correct,
please change the power connection.
When you change & install the abrasive belt,
please make sure that the abrasive belt has the
same rotational direction as the machine. (See
label on the machine)
Make sure the abrasive belt is tracking correctly.
Support workpiece with work table.
When the front work table is going to be used at
an Incline, please make sure that the inclined
direction is correct and the work table is firmly
fixed on the machine, Fig. 1, shows the correct
front work table inclination.
Fig. 1
Wear eye protection.
Don’t wear gloves, neckties, or loose clothing.
Keep hands away from the abrasive belt.
Before operating the machine, be sure the abra-
sive belt is in the right track. The simple way to
test it is to turn on the machine, check whether
the abrasive belt is on the right track, then turn
it off Immediately.
*Sand with the grain of wood.
*Hold the work firmly, so that it may not be driven
from your hands.
*Feed workpiece against rotation of abrasive belt.
When in operation, do not push the abrasive belt.
Excessive pressure against the abrasive belt is
never necessary. It will only result in the dam-
age of the abrasive belt or the workpiece.
SAVE THESE INSTRUCTIONS
Unpacking A nd Cleanup
To ensure maximum performance from your edge
sander, clean it properly, and install it accurately
before use.
As soon as you receive the edge sander, we rec-
ommend you follow these procedures:
1. Inspect packing crate for damage in transit.
Record damage, and report it immediately to
shipper
2. Open crate and check that machine arrived in
good condition. If not, let your industrial dis-
tributor know immediately.
3. Before lifting machine, remove all foot bolts
locking it to its shipping base.
4. Transport machine to location with a hand
truck or dolly.
5. Do not use solvents on plastic parts and elec-
tric cord; solvents dissolve or damage plastic
and electric cord.
