Magnum Industrial MI-16400, Operating Manual

Page: 4 / 9

4
2. ADJUST CLAMP HANDLE (B) AT DESIRED TO
CHANGE NEW BELT. SEE FIG.4
3. LOOSEN ANGLE LOCK KNOB(A) TO SET AND
TIGHTEN THE ANGLE.
Fig: 5
1.MITER GAUGE (A) CAN BE ADJUSTED 45
°－
90
°
AND CLAMPED BY HEX. HANDLE (B), SEE FIG.5
2.ADJUST MITER GAUGE(A)2.ADJUST MITER
GAUGE(A) TO GET REQUIRED ANGLE GAUGE.
Fig: 6
ADJUST ROLLER TO TARCK BELT SEE FIG. 6
Fig: 6A
ADJUST ROLLER TO TRACK BELT SEE FIG.6
Fig: 7
FOR CONTOUR SANDING SEE FIG. 7
Fig: 7A
FOR CONTOUR SANDING SEE FIG. 7
Fig: 8
1.MOUNT LOCATING PLATE(A) FOR FLAT SANDING.
2.ADJUST KNOB TO CLAMP BRACKET(C) FOR
SECURING JOB. SEE FIG. 8
3.ANGLE LOCK KNOB(A) TO SET ANGLE AT CERTAIN