CARING FOR YOUR BRUSH
Replace your brush head every 3
months otherwise bristles may start to
splay, scratch and can cause abrasion.
Always use original Magnitone brush
heads. Do not use brush heads that
are not intended or suitable for the
Magnitone Pulsar brush.
HANDLE MAINTENANCE
• After each use, we recommend removing the brush head
from the handle and rinsing it clean with water to remove
any residue or debris. You may soak it in water to clean
fully.
• Leave the brush head to dry out fully before replacing
brush head protection cap.
• Never use chemicals or abrasive cleaners to clean your
brush heads.
18
19
DEVICE TECHNICAL SPECIFICATION
SPECIFICATION
AC ADAPTER / CHARGE CRADLE
Input voltage: 100 – 240V
50/60 Hz
Output voltage: 12V DC
500 mA
Full charge time: 15 hours
Quick charge time: 75 mins
Made in China
MP002 BRUSH
Waterproof rating: IP7
Power 6W
Average amplitude: 15,500 times/min
Made in China
GETTING IN TOUCH
If you have any questions about Magnitone products,
warranty, accessories and parts or if you experience any
difficulties, please get in touch with our customer care line on:
[email protected]
or call the Magnitone team on +44 (0) 330 223 1066
(UK standard rate applies)
©2014
Magnitone is a trading brand name owned by:
R.N. Ventures Ltd. London SW11
www.magnitone.co.uk
Summary of Contents for Pulsar
Page 1: ......
Page 47: ...www magnitone co uk...
