Magnit RMV-1931, Instruction Manual

Page: 10 / 24

The life-time of the product is 2 years.
You can find full information about the appliances of “MAGNIT” trademark on
www.magnit.net
EN
10
Caution:
It is normal that the white central filter in the dust barrel may change color,
which cannot affect its filtration performance. If the hose and the central filter
are difficult to clean, we recommend that you use water to flush them;
however, please be sure to place them in the dry air for at least 24 hours after
they are flushed by water.
Key Points:
Please note: when the dust collecting barrel or the filter cover is not installed
in place, the operation status will be invalid, and the cleaner will have no dust
absorption capacity. At this time, you need to check carefully whether the dust
collecting barrel and the filter cover have been installed in place.
Caution: please keep the suction passage unobstructed, otherwise the motor
may become overheating or even be damaged.
REPLACEMENT OF REAR FILTER FOR MOTOR
The rear filter for motor is installed behind the air outlet grid, which cannot be
washed due to the materials used. When the surface is jammed seriously by
dust, the filter should be replaced by a new one to maintain enough suction
force. (Figure 11)
Figure 11
It is usually necessary to clean and replace the filters for motor only
after they have been used for 6 months to 12 months. Please
remember to confirm that all filters have been correctly installed
into the machine before turning on the cleaner to use.
Key Points:
The power supply of the cleaner must be cut off before replacing any filter!
Faults and repair
In case of abnormality with this product, please treat it in the way as stated
hereinafter; if the cleaner still refuses to work normally, please contact the
stop from where this product was bought or with the appointed service point.