![background image](http://html1.mh-extra.com/html/magnisight/explorer-classic-mse-l19/explorer-classic-mse-l19_user-manual_3586695004.webp)
DVI Signal Cable
Power Cord (to Wall Outlet)
Monitor
Power Cord
3
Set-Up (cont’d)
5. Next, connect the Monitor Power Cord
on the
rear panel of the camera. Note: the power supplied to the AC OUT
jack turns on & off with the camera power switch.
to the AC OUT jack
6. Finally, connect the monitor signal cable to the Monitor Jack
rear panel of the camera.
on the
!
CAUTION: THE POWER SUPPLY CORD IS USED AS THE
MAIN DISCONNECT DEVICE. ENSURE THAT THE SOCKET-
OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS
EASILY ACCESSIBLE
Summary of Contents for EXPLORER Classic MSE-L19
Page 1: ...MSE L19 User s Manual R ...