39
Notice
：
If you want to upgrade the firmware version, please contact the
technical support of MIG .
MISC option
Set up the functions of this machine
Status Info
Firmware
version
Displays the firmware version of this machine
Electrical
state
Display the electrical status of each part of this machine
Test Pattern
Output test screen (main output), 0 is closed
LCD panel
test
pattern
Test whether the LCD panel of this machine displays
normally or not, operate through the knob or the prompt
menu on the LCD screen.
Duration
Select the switch speed of the TAKE button, ranging from 0 to 3
seconds, 0.5 seconds is default
Take Mode
Select the switch mode of this switcher, switch mode or edit mode,
switch mode is default
Frame
Lock
Setting
Select the synchronous mode of this machine, publish as free scroll,
synchronize to layer 1 and Genlock, you can just use the default free
scroll mode.
Touch screen
Select to enable touch screen. It is enabled by default
T-bar
Select to enable the T-bar.It is enabled by default
T-bar
Calibration
Calibrate the T-Bar
Factory Reset
Reset the machine to factory settings ,prompt A.C. Restart after
confirming to continue.Then the power off and restart.