24
Fade In&Out Switch
Fade In&Out
Switch
“
VGA1
╳ <- 【OK】 -> DVI”, as shown in the left example, “【OK】”
the left side shows the name of the input port of channel 1, channel 2 on
the right shows the input port name; sample The cursor is on the left, the
port name is VGA1, next to the“╳”that no valid signal under VGA1 input
port; use the“OK”,“FADE”,“LEFT”or“RIGHT”key, between the two input
ports Fade to switch; use the“input port selection key”could switch the
under layer port to the appropriate port（Do not conflict with the top layer
port, Please refer to
Dual pictures input source conflict list
[
22]）
Please note, if“╳”is shown beside the port name, there is no valid signal
under the port, the actual display was a black screen.
Fade Period
The process of fade in fade out can experience for 0 second to 5 seconds.
If set to 0 seconds, then switching process would be finished
instantaneously.
Multi
Connection
Multi machine combined setting, combination switching function setting
machine
Reset
Press“RIGHT”or“OK”to reset the parameter in the fade in fade out
function.