25
BE 58-602 Pulsar
®
Model R96 Radar Transmitter
Advanced Password
Certain portions of the menu structure that contain more
advanced parameters are further protected by an Advanced
Password.
This password will be provided, when necessary, by Factory
technical support.
Factory Password
Calibration-related and other factory settings are further
protected by a Factory Password.
2.6.4 Model R96 Menu: Step-By-Step Procedure
NOTE: Context-sensitive HELP is available for all menu items. With the
menu item highlighted, hold down the
➪
ENTER
key for two
seconds. Use
UP
and
DOWN
for navigation.
The following tables provide a complete explanation of the
software menus displayed by the PULSAR Model R96
transmitter. The menu layout is similar between the local
Keypad/LCD interface, the DD, and the DTM.
Use these tables as a step-by-step guide to configure the
transmitter based on the desired measurement type from the
following selections:
• Level Only
• Volume & Level
HOME SCREEN
The Home Screen consists of a “slide show” sequence of
Measured Values screens which are rotated at 2-second
intervals. Each Home Measured Value screen can present up
to four information items:
• HART
®
Tag
• Measured Value
Label, Numerical Value, Units
• Status
Will be displayed as text or optionally with NAMUR
NE 107 symbol
• Primary Value Bar Graph
(shown in %)
The Home Screen presentation can be customized by view-
ing or hiding some of these items. See DISPLAY CONFIG
under the DEVICE SETUP menu in Section 2.6.5 —
Configuration Menu.
At left is an example of a Home Screen for a Model R96
configured for a Level Only application.
➪
➪
Up
Down
Back
Enter