1
4
5
6
7
8/9
1
1
2
2
3
1. Put 2 kilos paraffi n into the container. Place the protective
screen over de paraffi n and close the lid. Never add water to
make the paraffi n melt faster.
2. Plug into 220V Electricity. Turn the switch to ‘I’. When the
indicator light is glowing it means the heater is working. When
the right temperature is received the ‘Normal’ led will glow. The
paraffi n melts in four to fi ve hours. If you want to melt faster
turn the switch to high.
3. Control the temperature using ‘Up’ and ‘Down’ at your wishes.
The lowest temperature is 50 degrees Celsius and the highest
60 degrees Celsius.
4. Wash your hands and dry with a towel. Spread your fi ngers en
put them in the melted paraffi n for one or 2 seconds. Take your
hand out, let the paraffi n drain en repeat for 4 seconds. Repeat
this 4 to 5 times so you’ll end up with warm smooth paraffi n.
5. Put your hand in large plastic gloves and than in cotton gloves
to keep it warm.
6. Remove the paraffi n after ten minutes.
7. Use the same method for feet. Preferably use a separate bath
for feet.
8. You can use this method for other body parts such as the
elbows. The hot paraffi n can also be applied with a brush.
9. Rub your hands with hand cream or mask before you dip the
hand in the paraffi n for the fi rst time. Because of the insulating
effect the ingredients will penetrate deeper into the skin.
Instructions for use