Magnetic MHTM FlowMotion mWing Operating Instructions Manual Download Page 42

Page: 42 / 80

mWing

Installation and assembly

7.6

Align the pedestrian gate

When installing several pedestrian gates, align the pedestrian gates to the cus-

tomer's specifications and to the on-site conditions, e.g. walls, tile joints and

railings, using a laser or scale.

7.7

Mounting the mWing

7.7.1

Mounting variant "Direct mounting"

With this mounting variant, you mount the pedestrian gate directly on a foun-

dation.
Required material (not enclosed):

›

Attachment set BSS100 for mounting the pedestrian gate directly on a foun-

dation

Prerequisites

›

The foundation was built.

›

The empty conduits were laid.

›

The foundation has cured.

Summary of Contents for MHTM FlowMotion mWing

















































































Search results

Summary of Contents for MHTM FlowMotion mWing

Reviews:

Related manuals for MHTM FlowMotion mWing

Brands by name

Popular brands

Magnetic MHTM FlowMotion mWing, Operating Instructions Manual

Search results

Summary of Contents for MHTM FlowMotion mWing

Reviews:

Related manuals for MHTM FlowMotion mWing

Brands by name

Popular brands