Operation
1. Connect the cables for the electric supply to the Kick-Off II
electric fi le.
2. Connect the plug into an electric point (9).
3. Turn the rotation button to the lowest speed.
4. Turn the power switch on. The warning light will light up
green (5).
5. Increase the speed by turning the speed button clock wise.
6. Switch from forward to reverse using the rotation switch.
Safety System
When malfunctioning
When the machine doesn’t function at all, fi rst check the plug.
When the power supply is working a fuse may have blown.
• Make sure the cables are correctly connected.
• Make sure the bit is properly placed.
• In case of overloading the Kick Off II electric fi le the circuit
breaker will temporary cut off the power to the fi le.
Instructions for use the hand piece
Standard Accessoiries
1. Protector bit bur
2. Collet
3. Set Ring
4. Motor Cap
How to change bits
1. Hold the hand piece in your hand, turn set ring fully to
release position to replace the bit.
2. Carefully remove the bit of the collet and replace by placing
the bit on the bottom of the collet.
3. Turn set ring back to set position where the collect is
secured/closed.
4. Check if the bit can rotate using your fi ngers. Avoid injuring
your fi ngers.
Collet changing
Terms & conditions
Advice
• Take a electric fi ling course at your local Magnetic Nail
Academy. There you will learn how to work quick and
safe. During the course you will also get advice on how to
maintain your equipment.
Warranty
Magnetic offers a two year warranty on the electric equipment.
During this time Magnetic repairs or replaces the product for
free, if you can show the proof of purchase and the warranty
certifi cate. Read – for you own safety benefi t – the following
conditions regarding the warranty of your electric equipment. In
case of malfunction and claim, fi rst contact the local Magnetic
Distribution Centre you bought the machine.
Limited warranty
Warranty covers manufacturer defects only and only if the
instructions for use were followed. This Kick-Off II Electric File
System is designed for use in the application of artifi cial nails.
It’s use is restricted to professional, skilled nail technicians.
Magnetic takes no responsibility when the machine is operated
by unskilled persons.
The following conditions void warranty after:
• Using oil or grease on hand piece or control box;
• Servicing or dissembling the hand piece or control box by any
other person than employees of the Magnetic Nail Academy;
• Dropping or excessive shock to hand piece or control box;
• Immersing the hand piece or control box in any type of
sterilizing or cleaning solution;
• Inserting bent or damaged bits in the hand piece. When
operation the hand piece with damaged bits, the bearings
will be damaged.
• Returned goods which were damaged by insuffi cient packing,
are the responsibility of the sender.
• This warranty does not affect your legal rights.
We value your opinion. If you have questions or remarks about
Magnetic-products, please visit us at www.magneticnaildesign.com
GB