magnetic
...einfach besser
5
Intended use
The magnetic drinking water filter is intended for the filtration of drinking wa-
ter. It protects water pipes from malfunctions and corrosion damage from
foreign objects such as rust, sand or chips.
The filter cannot be used with chemical-treated circulating water. It is not suit-
able for oils, greases, solvents, soaps and other lubricants, or for removing
water-soluble substances.
Requirement for the installation site
Local installation regulations, general guidelines (e.g., WVU, DIN, DVGW or
ÖVGW or SVGW) and technical data must be observed. The installation site
must ensure that the filter is protected from chemicals, dyes, solvents, va-
pours and direct sunlight. Observe flow direction (marking on the flange) and
install free of stress. The installation site must be frost-proof. The filter must
be installed in pipelines of the same size according to its nominal size. A sew-
er connection according to DVGW or a corresponding collecting vessel (e.g, a
bucket) must be available for the drainage of the rinsing water.
The discharge takes place in accordance with DIN 1988 Part 4, e.g., freely
into the floor drain, into the sewer connection or the collecting vessel. Ensure
that the flushing water is drained without backflow.
