Magneti Marelli BAT2000, User Manual, Page: 14 / 26

SELECT RATING
SAE
SET CAPACITY
XXXX SAE
TEST IN VEHICLE?
NO
TESTING
POINT TO BATTERY
PRESS ENTER
3. Press the
◄ ►
key to select
battery rating
：
SAE (CCA), EN,
IEC or DIN. Press «ENTER» to
confirm choice.
4. Press the
◄ ►
key to input the battery capacity ：
• SAE (CCA)
：
40~3,000
• EN ： 40~2,830
• DIN
：
25~1,685
• IEC
：
30~1,985
• JIS ： Battery Type No.
Press «ENTER» to begin the
test.
5. Press the
◄ ►
key to
confirm the location of the
battery if a surface charge is
detected, follow the tester ‘s
instruction to remove the
surface charge.
6. Testing battery.
7. Aim the “Temperature
Measurement sensor” 2.5cm
(1 inch) from the top or sides
of the battery case and press
<<ENETR>>. Measured temperature may vary by