Magneti Marelli ATF EXTRA PRO, User Manual, Page: 11 / 25

11 USER MANUAL
In case of transport on vehicle ensure that the unit is firmly positioned before proceeding.
5. PREPARATION
5.1 Preparing the ATF EXTRA PRO
Ensure that the NEW FLUID tank contains the quantity of fluid that you need to change. We advise
changing two litres more than the quantity indicated as nominal content of “dry” gearbox.
Place the NEW FLUID tank in the rear compartment of the ATF EXTRA PRO (NEW ), as shown in
figure 2.2.
Ensure that the volume remaining in the USED FLUID tank is sufficient to receive the total quantity of fluid
that will be replaced, otherwise the used fluid will overflow from the tank.
Place the USED FLUID tank in the rear compartment of the ATF EXTRA PRO ( OLD), as shown in
figure 2.2.
When positioning the ATF EXTRA PRO for any type of process, you should make sure that at least the two
GREEN and RED indicator lights are visible.
CAUTION:
After receiving the ATF EXTRA PRO you need to perform an FLUID PRIMING
CAUTION:
When filling and emptying the tanks, take care to avoid impact.