Technical Data:
1.
Pump Ratio: 5:1
2.
Power: Filtered Air Compressor
3.
Suit For: All kinds of Engine Oil and Gearbox Oil
4.
Air Pressure: 5-8Bar(70~115PSI
）
5.
Air Consumption: 240L/Min. (63.5Gallon/Min.)
6.
Oil Delivery Speed: 12~18L/Min. (3.2~4.8Gallon/Min.)
7.
Length of Pump: 740mm/29inch
8.
Air Inlet Connection: 1/4” quick plug
9.
Oil Delivery Connection: Male 1/2”
10.
Max. viscosity Oil Delivered: SAE 250
11.
Temperature of Oil Delivered: -10~50
℃
Description:
Power from Air Compressor which is safe, environmental-friendly and free of spark. Oil pump
can be used to transfer lubrication oil, wasted oil and antifreeze liquids.
Operation:
Preparation
1.
Handling and storage of the new pump do not require any special procedures. However after
the pump has been used, empty the used oil in the suction tube into an appropriate container
always. This can be done by overturning the pump.
2.
Connect the oil delivery tube with the oil outlet of the pump ready.
3.
Connect filtered air compressor (to be supplied by customer) with Air Inlet (1/4”) of Pump.
4.
A pressure regulator to keep the pump’s working pressure at the best possible level (5~8bar)
between the pump and the compressed air line, if necessary.
5.
A cut-off cock in order to enable the operator to stop the pump at any given moment by
cutting the air supply off between the pump and the compressed air line.
6.
Now it is ready for oil filling by switch on all cocks.
Attention: Please do not exceed the max. air pressure:115PSI.
