IMPULSE®•G+/VG+ Series 4 Digital Input Installation Manual - August 2011
1-12
2.
Insert the option card (B) into the CN5-A (J), CN5-B (K), or CN5-C (L) connector located on the
drive and fasten it into place using one of the included screws (F).
NOTE:
Install the option to ports CN5-B and CN5-C on the drive for monitoring purposes only and
input levels will be displayed in monitor U1-17. The option will not set the frequency
reference or replace the drive analog input with higher resolution inputs when connected
to ports CN5-B or CN5-C.
Figure 5: Insert the Option Card