Utility U0 Menu
122
CUBE ID Screen
Displays the cube identification number of the
drive.
Model
cube
size
ID#
HPV900-4008-2E1-01
1
4008
HPV900-4012-2E1-01
2
4012
HPV900-4016-2E1-01
2
4016
HPV900-4021-2E1-01
3
4021
HPV900-4027-2E1-01
3
4027
HPV900-4034-2E1-01
4
4034
HPV900-4041-2E1-01
4
4041
HPV900-4052-2E1-01
4
4052
HPV900-4065-2E1-01
5
4065
HPV900-4072-2E1-01
5
4072
HPV900-4096-2E1-01
5
4096
HPV900-2025-2E1-01
2
2025
HPV900-2031-2E1-01
2
2031
HPV900-2041-2E1-01
3.5
2041
HPV900-2052-2E1-01
3.5
2052
HPV900-2075-2E1-01
4
2075
HPV900-2088-2E1-01
4
2088
HPV900-2098-2E1-01
5
2098
Cube ID Numbers
DRIVE TYPE Screen
Shows the drive software type HPV 900
Series 2
HEX MONITOR
(Hex Monitor)
The hex monitor was designed for fault and
parameter diagnostics. It is intended for use
by Magnetek personnel.
LANGUAGE SEL
(Language Selection Function)
When the Language Selection sub-menu is
displayed, the user can choose either English
or Alpha-numeric
for the operator’s text.
With Alpha-numeric selected, each parameter
has an alpha-numeric code accompanied by a
short English description. If the parameter has
multiple selectable settings, the settings will be
numbered.
ii
Parameter accessibly through PM (U9) Operation
For example, setting Speed Command Source
to serial, would
mean setting parameter ‘C101’
to ‘4’
The Alphanumeric values are provided in the
parameter tables above.
BASICS
(Basics)
When the Basics sub-menu is displayed, the
user can choose either open-loop, closed-loop,
or PM operation of the drive via the Operation
(U9) parameter.
ROTOR ALIGN
ii
(Rotor Alignment Function)
The Rotor Align submenu is meant for aligning
the rotor with the magnets in the motor. For a
detailed procedure see PM Start-Up Procedure
on page ix.
U6 8:55
Drive Type
HPV900-Series 2
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
C1 9:55
C101 Spd Cmd Src
4 SERIAL
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U9 9:55
Basics
CLOSED LOOP
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
