Flex EX2 Receiver Select Instruction Manual
August 2018
Page 25 of 39
4.1.9
Infrared Transmitter Settings
The IR programmer unit can be used to set the system
serial number, channel, type setting, RS function setting,
and many others. Please refer to the Flex IR Programmer
Manual or contact Magnetek field service for more details.
• All transmitters in a system are set to the same serial
number and assigned channel.
• All RS transmitters (regardless of their configuration)
come preset to Type 00.
• The RS Function settings for each transmitter
configuration come preset as follows:
4.1.10 I-Chip
A Flex EX2 transmitter will enter a Legacy mode and become backwards compatible
with Flex EX receivers once an I-Chip is inserted. The serial number, channel, and type
setting are transferred through the I-Chip. The dipswitch is NOT used to change the
channel. If the channel needs to be changed, please refer to the Channel Change via
Pushbuttons procedure in a GEN 1 Flex EX manual. The first 8 positions on the
transmitter dipswitch (positions 9 and 10 are not used) will operate the same as the
function dipswitch on the Flex EX transmitter.
NOTE 1:
All settings in this manual are no longer applicable once an I-Chip is inserted
into a Flex EX2 transmitter. Please refer to the appropriate GEN 1 Flex EX manual
instead.
NOTE 2:
A Flex EX transmitter will NOT work with a Flex EX2 receiver.
I-Chip Settings:
Serial number = match receiver/s
Channel = match receiver/s
Type = 00
RS FUNC: 03 RS FUNC: 02 RS FUNC: 04 RS FUNC: 06
Type B
Type C
Type E
Type F
