P.O. Box 13615
Milwaukee, WI 53213
Toll-Free Phone 800.288.8178
Toll-Free Fax 800.298.3503
N49 W13650 Campbell Drive
Menomonee Falls, WI 53051
Phone 262.783.3500
Fax 262.783.3510
www.magnetek.com
Instruction Sheet No. 0-CHR-03E R0
Battery Charger
Instruction Sheet
For Flex Transmitters
4. When the charging cable is plugged in, the associated status LED will blink green two or three
times again, followed by continuous fast blinks (indicating charging in progress) for 10 to 15
seconds.
5. When charging is completed, the associated LED status will light up as solid green.
6. When the charging cable is unplugged, the associated LED will turn off (indicating standby
mode).
NOTE: The total charging time is approximately 1.5 to 2 hours.
7. For in-car charging (12-24 VDC), us the factory approved cigarette lighter adaptor (part number
CIG-01).
Figure 4: Cigarette Lighter Adaptor CIG-01
8. Use only factory approved 100-240 VAC power transformers with 12 VDC output, as unapproved
power transformers on the market may not be compatible with this charging unit.
Figure 5: Power Transformer
9. Figure 6 and Figure 7 show the desktop and wall mounted housing installation (part number
DWH-01) should be set up.
Figure 6: Wall mounted housing
Figure 7: Desktop mounted housing