Gauss-/Teslameter
FH 52
BA - Nr.: 1620010102
Page 22
Fig. 9: Relative menu
In the first line of the
Relative
menu the function can be switched on or off. If it is switched on,
the reference value is shown in the status line of the measurement display.
In the following line the reference value can be entered. First the currently stored value is
shown. If this value shall not be changed, simply press
Enter
or
Mode
. If you want to enter a
new reference value, replace the current value. Move the selection mark with the
←
→
arrow
keys onto the sign or onto the digit to be changed and change them with the
↑
↓
arrow keys.
Terminate editing using
Enter
or
Mode
.
If the desired reference value cannot be entered in the active range, you can change the range
using the
Range
key without leaving the input line. Please note that the automatic range
selection (
Auto
) is switched off in this case.
You can also make the actual reading become the reference value. Therefore press the
Zero
key
while the selection mark is in the input line for the reference value. The actual reading becomes
the reference value.
If the functions
Relative
and
Max./Min.
are used together, the maximum and minimum
deviation from the reference value is shown.
3.3.13
Information Menu
The following information can be retrieved in this menu:
•
The version number of the device
•
The serial number of the device
•
The name and the version number of the probe
•
The serial number of the probe
