Magnescale SmartSCALE SQ47-Z Series, Instruction Manual

Page: 53 / 82

(E)
21
SQ47-Z Series, CH22 Series
8. Troubleshooting
If a problem with this product is suspected, be sure to check the following contents.
Check that the cables and connectors used to connect the product and controller do not have any
problems.
If a problem is found, replace the part concerned.
Check whether any of the mounting screws are loose.
If any loose screws are found, tighten them up
again with a proper tightening torque.
Check that this product is installed in accordance with the instructions in "3-2. Installing the Scale
Unit."
Also, check that the brackets used to install the scale and sensor head respectively are installed within
the recommended standards.
If there is a problem with the installation, install
the product again.
Contact our sales or service department.