7 (E)
4.
The DTM catalog update will start. Wait until the update is complete.
Fig 4-3
Automation Studio -- Importing the GSDML file -- No.3
5.
The update is complete when the message “DTM catalog update successfully
finished…” appears in the “Output” pane.
Fig 4-4
Automation Studio -- Importing the GSDML file -- No.4
6.
“X20BC00E3” can now be selected from the “Catalog” tab of the “Hardware
Catalog” pane.
Fig 4-5
Automation Studio -- Importing the GSDML file -- No.5
Summary of Contents for MG70-PN
Page 2: ......
