LY71 Change of display resolution (polarity)
2/3
Press key once while the display is .
The display will be (measurement unit resolution).
Basic settings
⇒
Measurement unit resolution
⇒
Change
Input 1
Input 2
Display example when inputting 2 axes
Press key to check the current measurement unit resolution.
LY71
Set to basic settings mode.
Turn key “ON” while the AC adapter is energized.
Press and hold key for 3 seconds after the lamp changes from blinking to off.
①
Power ON
About 2 sec
②
③
Press
key of the axis you want to change and select
the measurement unit resolution.
When you have made your selection, press
key to save your settings.
④
Press
key once to automatically switch to advanced settings mode.
The display will be
.
Press
key, the display becomes the normal display.
⑤
⑥
Switch from basic settings to normal count mode.
Press
key once and the display will change to
.
Press
key once and the display will change to
.
Standard
Expansion
Extended key
Selection of measurement
unit resolution
