MAGNER100 USER MANUAL
Magner INT
25
Error Code List
No
Error Code
Description
1
Chain 1 error
The gap between two notes is under 100mm.
2
Chain 2 error
After note passes counter sensor, note length is over 100mm.
3
JAM 1 error
Encoder value isn’t increased although motor turns.
4
JAM 2 error
Because note places on Counter sensor and motor is kept turning ticking
over, length information is increased.
5
JAM 3 error
Note is not moved to upside when motor turns counter direction.
6
Motor error
Motor isn’t controlled properly.
7
Double error
Thickness by measuring IR is lower than the standard.
8
Half error
Only half of note is recognized.
9
MinSize error
Note size is smaller than the minimum size.
10
SKEW error
The difference between R and L is over 10 mm.
11
Rotate error
Note is rotated over an angle of 20 degrees.
12
XSize error
X size of note is not matched. (CIS sensor information)
13
YSize error
Y size of note is not matched. (Cnt sensor information)
14
IR 1 error
IR error
15
Color 1 error
Color error
16
UV 1 error
UV error
17
MG 1 error
MG error
18
Differ value
Counted note is not matched with the selected denomination.
19
Differ version
Version is different with the set version.
Summary of Contents for Magner100
Page 1: ......
