A Selection of Speaker Location
Before a permanent installation is begun, we highly recommend purchasing
the $30 pair Disposable Speaker Stand Kit to determine if the selected location
gives the desired audio performance for the MMC 2s before the
fi
rst holes are
drilled.
Th
ese mobile wall stands allow the speakers to be easily moved around
the room until a permanent position is located. A set of mounting brackets are
included with the MMC 2 speaker panels for placement of the speaker panels
on the Disposable Speaker Stands.
Because the MMC 2 can used for any channel in a home theater or music
system (including as a center channel), and because rooms conditions vary
greatly, speci
fi
c and detailed instructions are not practical. However, there are
general guidelines to follow.
Avoid corners.
Choose a placement that will position the MMC 2 as far from a
corner as possible - preferably more than 3 or 4 feet and the further, the better.
We want you to be a satis
fi
ed customer and this is a critical issue for good
sound.
Th
is is especially important for the front channels. Rear channels play a
lesser role and more liberties can be taken with the rear channels.
Choose a placement that will allow the bottom of the MMC 2 to be
approximately 26 inches from the
fl
oor for proper high frequency dispersion
when you are sitting or standing.
To help determine the front of the MMC 2, the quasi ribbon foil can be seen
through the fabric on the front of the speaker.
Th
e speakers should be
mounted so that the front of the speakers are on axis with the listener.
CAUTION- Using a level, check to see if the walls are within building code for
plumb (vertical to a level
fl
oor). If the walls are too far out of plumb, the
speakers may not open or close.
Revision-- 7-25-15
Page of
2
23
