Maintenance
Preventive Maintenance
MagneMover LITE User Manual
9
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Some systems may have applicators mounted in both locations on the same vehicle.
The felt end of the applicator is always pointed inwards toward the rail with the refill
access portal at the opposite end of the reservoir. See
for illustration of
applicator housing.
Figure 7-2: Precision Rail Vehicle Lubricating Applicator Location
Figure 7-3: Precision Rail Vehicle Lubricating Applicator (Front and Rear)
3.
Insert the tip of the oil filled syringe into the refill hole on the applicator.
NOTE:
On single array vehicles, if the applicator is located between the concentric
bearings (on the magnet array side of the vehicle), use the lubrication portal
shown in
to access the oil refill hole on the applicator.
Applicator
Concentric
Bearings
Applicator
Eccentric
Bearings
Oil Refill
Felt Applicator