background image

93

EN

93

EN

Recording

Playback

Editing

Introduction

Connections

Basic Setup

Function Setup

VCR Functions

Others

Español

TROUBLESHOOTING

Error message

Cause

Solution

Disc Error
— Please eject the disc. —
Playback feature may not be available on 
this Disc.

• Unplayable disc is inserted in the unit.
• The disc is upside down.

• Insert the standardized disc which bear 

the marks on page 50.

• Insert the disc with the labeled side 

facing up.

Region Error
— Please eject the disc. —
Playback is not authorized in your region.

• Playback is not authorized in the region 

of the DVD-video which you inserted in 
the unit.

• Insert the DVD-video with region codes 

1 or ALL.

Parental Lock On
The current selected parental level 
prohibits playback.

• The current selected parental level 

prohibits playback.

• Check “Parental Lock” setting in 

“Playback” menu (page 85).

Recording Error
This program is not allowed to be 
recorded.

• The recording function encountered 

the copy prohibited program.

• You cannot record copy prohibited 

programs.

Recording Error
This program is not recordable in +VR 
mode.

• You are trying to record the copy-once 

program.

• You cannot record  the copy-once 

program.

Recording Error
Can not record on this disc.

• You are trying to record onto the disc 

which is unrecordable, or the disc status 
is unable to record.

• The disc is dirty.
• The disc is damaged.

• Insert the recordable disc, and ensure 

the disc status satisfies the recording 
requirements (page 33).

• Clean the disc with a cleaning cloth.
• Replace the disc.

Recording Error
This disc is protected and not recordable.

• You are trying to record on to the 

protected disc which is set in “Disc Edit” 
menu.

• Release the disc protect setting in “Disc 

Edit” menu (page 76).

Recording Error
Disc is full. 
(No area for new recording)

• You are trying to record onto the disc 

which has no space for recording.

• Insert the recordable disc with enough 

recording space.

Recording Error
You cannot record more than 49 titles on 
one disc. 
(The maximum is 49)

• You are trying to record onto the disc 

on which the number of recording titles 
comes up to the maximum (49). 

• Delete unnecessary titles (page 66).

Recording Error
You cannot record more than 254 chapters 
on one disc. 
(The maximum is 254)

• You are trying to record onto the 

DVD+RW or DVD-RW on which the 
number of recording chapters comes 
up to the maximum (254).

• Delete unnecessary chapter marks 

(pages 69-70).

Recording Error
You cannot record on this disc as Power 
Calibration Area is full.

• When recordings are performed 

repeatedly onto an unstable disc, this 
area may come up to be full.

• Every time you insert a disc for 

recording, the disc’s working area will 
be taken up. And if you repeat this 
frequently, it will be used up sooner 
and you may not be able to record full 
49 titles.

• Insert a new disc.

Recording Error
This disc is already finalized.

• You are trying to record onto the disc 

already finalized.

• Release the finalizing for this disc 

(page 46).

Recording Error
The disc has a different menu layout. (Set 
“Replace Disc Menu” to “ON” to rewrite 
the menu.)

• You are trying to record onto the 

disc that had been recorded by other 
recorders.

• Set “Replace Disc Menu” to “ON” to 

rewrite the menu, after that you will 
record to disc (page 34).

*  If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the 

error description for calling our help line mentioned on the front page to locate an Authorized Service Center.

E9C80UD.indd   93

E9C80UD.indd   93

2006/12/19   14:03:38

2006/12/19   14:03:38

Summary of Contents for ZV450MWB







































































































Reviews: