1
2
3
4
5
Using the remote control ..............................................................
Remote control specifications......................................................
Button functionality .................. ....................................................
How to use the buttons .................................................................
Auto mode................................................................................................................
Cooling/Fan mode...................................................................................................
Dehumidifying mode ..............................................................................................
Sleep mode...............................................................................................................
Timer ........................................................................................................................
Energy saving mode ...............................................................................................
CONTENTS
Use the remote control within 16.4 foot range
from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
Range of the remote control
16.4ft
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block
the signals from the remote control to the AC unit.
Prevent any liquid from interfering into the remote control. Do not expose the
remote control to direct sunlight or heat.
If the infrared signal receiver on the AC unit is exposed to direct sunlight,
the air conditioner may not function properly. Use curtains to prevent the
sunlight from interfering on the receiver.
If other electrical appliances react to the remote control, either move these
appliances or consult your local dealer.
Using the remote control
2
Sleep
C
Fhilete
crk
Fo
M
lleow
Auto
On/off
Fan
High
Med
Low
E
S
n
a
e
v
regry
on
off
Timer
Auto
Fan
Cool
Dry
Mode
TEMP/TIMER
TEMP/TIMER
Heat
5
5
6
6
7
Installation instructions of battery
Step 1: Insert a coin vertically in the groove
on the battery cover, clockwise rotation of 45
degrees, make sure that the groove is aligned
with the "unlock" sign as shown below
and remove the battery cover.
Step 2: Install battery inside the remote
control, the positive (+) side up.
Step 3: Install the battery cover, make
sure the battery cover groove is aligned
with the "unlock" sign. Insert a coin
vertically in the groove and press it
gently, then counter clockwise rotation
of 45 degrees, make sure the groove is
aligned with the "lock" sign as shown
below.
9
Coin
Battery cover
Groove
Lock sign
Unlock sign
Groove
Unlock sign
Battery cover
Battery
Positive (+) side up
Coin
Groove
Battery cover
Unlock sign
Lock sign
Coin
Groove
Battery cover
Unlock sign
Lock sign
Lock sign
Coin
WARNING
1. Battery must be disposed properly. Do not short
circuit or dispose in the fire.
2. Keep batteries out of the reach of children.
3. Caution for ingestion.
4. Non-rechargeable batteries are not to be
recharged.
5. Exhausted batteries are to be removed from
the product.
