6
Window Installation Kit
Press the exhaust hose into the window slider adaptor and unit adaptor,
clamps automatically by elastic buckles of the adaptors.
Step One: Preparing the Exhaust Hose assembly
Step Two: Install the Exhaust hose assembly to the unit
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the
window slider.
2. If the length of the window requires two window sliders, use the bolt
to fasten the window sliders once they are adjusted to the proper
length.
Window slider A
Window slider B
Bolt
Insert unit adaptor of the Exhaust hose assembly into the lower groove
of the air outlet of the unit while the hook of the adaptor is aligned with
the hole seat of the air outlet and slide down the Exhaust hose assembly
along the arrow direction for installation.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is inserted into the lower
groove of the air outlet.
Unit adaptor Window slider
adaptor
Exhaust hose
Exhaust hose
assembly
Installation
Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
Accessories
Part
Description
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 set
1 set
Unit Adaptor
Window Slider Adaptor
Window Slider A
Window Slider B
Exhaust Hose
Bolt
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and 2 Screws
Drain Hose
Quantity
Remote Control and Battery
(For remote control models only)
O
N
/O
FF
TE
M
P
SH
OR
T
C
UT
TI
M
ER
O
N
TI
M
ER
O
FF
M
OD
E
FA
N
SL
EE
P
SW
IN
G
LE
D
Your Window Installation Kit fits windows 26.5-48” (67.5-123cm) and can
be shortened for smaller windows.
