Magnavox NB500MG9, Service Manual

Page: 17 / 73

1-7-3 E5E20FW
FIRMWARE RENEWAL MODE (for User)
1. Turn off the power of BD-Player.
2. Press [OPEN/CLOSE] to turn on the power of BD-
Player. The tray will open automatically.
3. Load the disc for version up. Fig. A appears on the
screen and Fig. B appears on the VFD.
4. Press [OK] to carry out “YES”. The display will be
replaced by Fig. C and Fig. D.
5. Load the disc for version up. The display will be
replaced by Fig. E when it finishes reading the
data of the disc.
6. Please remove the update disc, and press [OK].
The tray will close automatically.
7. When the tray has closed, it will renew data
automatically. Then the display is replaced by Fig.
F. Progress degree is displayed like Fig. G on VFD.
8. After programming is finished, Fig. H appears on
the VFD.
9. Unplug the AC cord from the AC outlet. Then plug
it again. The player menu language is maintained,
and the other items are set by default.
Software Upgrade
Select 'Yes' and press 'OK' button to start upgrading.
Press 'No' to exit software upgrade.
Yes No
Fig. A
Fig. B
Software Upgrade
Loading Software ...
Fig. C
Fig. D
Software Upgrade
New upgrade data verified.
Please remove the disc and close tray to continue
OK
Fig. E
Software Upgrade
Do not turn off the power or interrupt upgrading process.
Front display will indicate FINISH upon successful upgrade.
Please turn off and on mains to restart.
---Upgrading in process---
Fig. F
Fig. G
Fig. H