background image

36  Special Effects Playback

Forward and Reverse Searching (SP/LP/SLP)

1

During tape playback, press and release the
F.FWD/

B

button or the REW(ind)/

{

button.

A fast

forward or reverse picture search will begin.

2

To return to playback, press the PLAY/

o

button.

Super High Speed Searching (LP/SLP)

1

During tape playback, press the F.FWD/

B

button or

the REW(ind)/

{

button, then press again.

The VCR

will now search in super high speed.  Press the F.FWD/

B

button or the REW(ind)/

{

button repeatedly to switch

between regular searching and super high speed searching.

2

To return to normal playback, press the PLAY/

o

button.

Viewing a Still Picture

1

During tape playback, press the STILL/PAUSE but-
ton.

A still picture will appear on the screen.

2

To release the still picture and return to playback,
press the PLAY/

o

button or press the STILL/PAUSE

button again.

Viewing a Slow Motion Picture

1

During tape playback, press the SLOW button

.  The

tape will play in slow motion.

2

To release Slow mode and return to normal play-
back, press the PLAY/

o

button or press the SLOW

button again.

•  Slow and Still modes will automati-

cally switch to Stop mode after five
minutes to protect the VCR and the
tape from damage.

•  SP/LP/SLP means this feature will

work with tapes recorded in
Standard Play, Long Play, or Super
Long Play.

•  LP/SLP means this feature will work

with tapes recorded in Long Play or
Super Long Play. For details about
tape speed, see pages 30 and 45.

Helpful Hints

CH

3

2

1

6

5

4

9

8

7

0

POWER

STATUS/EXIT

MEMORY

SLOW

REC/OTR

SPEED

TIME SEARCH STILL/PAUSE

VCR/TV

EJECT

MENU

CLEAR

REW

PLAY

STOP

F.FWD

mvr630mg.QX33  2/11/02  12:05 PM  Page 36

Summary of Contents for MVR430MG - Vcr Mono
















































Reviews: