Note:
3. Power on the unit and enter to AUX IN mode as previously instructed:
You will hear an audible prompt say “Aux in”.
“AUX” will appear on the display.
4. Play the music on the connected Player as usual. (Make sure the volume level of the connected
Audio Player is turned to high level.)
5. During playback:
Turn the Power On-Off/Volume Control Knob on the unit (Or, press the VOL (Volume) +/-
buttons on the Remote Control) to adjust the volume level as desired.
FM RADIO:
To listen FM Radio:
This unit has a built-in FM antenna which provides adequate reception. If reception is weak,
reassemble the other direction/location of the unit to improve the reception.
10
Antennas:
To sing along with the music playing:
1. Connect the plug from Microphone (not included) to the MIC IN Jack on the front of unit as
illustrated below:
2. Power on the unit and play the music as usual.
3. Speak or sing into the microphone.
4. Turn the Power On-Off/Volume Control Knob to adjust the sound level of microphone and music.
6.35mm
Mic connection
If feedback noise (high audio frequency noise) is hearing from the speaker, turn the Power
On-Off/Volume Control Knob counterclockwise to reduce the microphone/music level or moving
the Microphone away From the speaker.
MICROPHONE:
MODE
REP/LIGHT
1. Power on the unit and enter to AUX IN mode as previously instructed:
You will hear an audible prompt say “Radio”.
FM radio frequency “875-1080” (87.5-108.0 MHz) will appear on the display.
2. To store the available FM stations into the unit (up to 30 stations) at first time use (or relocate
the unit to a new location):
Press and hold the
Button on the unit or Remote Control approximately 2 seconds
until FM frequency on the display will start running.
Wait a few minutes, the unit will automatically store all the available FM stations into the
memory then playback the first station.
Press the
or
buttons on the unit or Remote Control repeatedly to select and
play the stored FM station as desired.
If you know the frequency of desired FM station, you can use the numeric buttons on the
Remote Control to enter the frequency then play it direct. For example, if you want
received FM station 106.5 MHz. You can press the numeric buttons on the Remote
Control “1” + “0” + “6” + “0”.
