Troubleshooting
Problems
Cause(s)
Solution
No power
The appliance is not correctly
plugged in or the power is not
turned on at the socket.
The fuse in the plug has blown.
Ensure the plug is correctly fitted
and the power is turned on.
Change the fuse in the plug.
There is no sound
or the sound is
distorted.
The audio cables are not correctly
fitted.
The volume is set to theminimal
level.
Check the audio cables are
correctly fitted in the back of the
appliance.
Turn the volume up.
Unabletoplay a
CD.
The CD has been placed in the CD
tray the wrong way up.
The disk is not compatible with the
appliance.
The disc is dirty.
Turn the disc over and try again.
You will not be able to play this CD
on this appliance.
Clean the disc.
The buttons on
the appliance do
not work.
Static electricity is interfering with
the appliance.
Switch the unit off and remove the
plug. Leave the appliance for a few
minutes, then slot the plug into the
power socket and turn the power
back on.
The remote
control does not
work
The batteries in the remote control
are flat.
The remote control is not pointing
at the sensor on the appliance.
The remote control is out of the
operational range of the appliance.
The appliance is in Standby mode.
Install 2 new AA batteries.
Ensure the remote control is
pointing at the sensor on the
appliance.
Ensure the remote control is within
range of the appliance.
Press the power button on the
appliance or remote control to turn
it on.