16
1.
In CD stop playing mode, press the PROG (Program) Button
on main unit or remote
control
. “P01” will
appear on the display and PROG indicator will blink.
2.
Select the first specific track to be programmed by pressing the (Next/Skip
Forward) or
(Previous/Skip Backward) Buttons on the unit or Remote Control
repeatedly.
3.
Press the PROG Button again to store the selected track into the memory.
4.
Repeat steps 2 and 3 until all the specific tracks stored into the memory.
5.
Press the
Play/Pause Button on the unit or Remote Control to start program
playback.
6.
To stop
press the
■
(Stop) Button on the unit or Remote Contro
l
once. “PROG”
indicator will remain on the display. Then press
Button to start program
playback
again.
7.
To stop and cancel the program, press the
■
(Stop) Button on the unit or
Remote
Control twice. “PROG” indicator on the display will disappear.
BT (BLUETOOTH) :
BT (Bluetooth) pairing
First time use or re-pairing the unit to a new BT Device, pair as follows:
1.
Power on the unit and enter to BT mode as previously instructed. “bt” indicator
will appear on the display and blink.
2.
Power on the external BT Device and enter to BT searching mode. Start pairing
following the on screen instructions from the external BT Device. After paired, the
“bt” indicator on the display will stop blinking.
3.
If pairing is complete you may now play music with your external BT Device.
4.
During playback:
z
Press the
Play/Pause Button on the unit or Remote Control to pause,
press again to resume normal playback.
z
Press the
(Next/Skip Forward) or
(Previous/Skip Backward) Buttons
on the unit or Remote Control repeatedly to skip tracks.
Notes:
z
When the external BT Device searched the unit,
model number “MM435
M
” will
appear on the display of external BT Device.
z
If while pairing you are asked for a code, please try "0000" or "1234".
Normal operation after pairing:
1.
Turn on the BT function of the external BT Device.
2.
Power on the unit and enter to BT mode as previously instructed. “bt” indicator
will appear on the display and blink.
3.
Wait a few seconds until the unit is automatically paired to the external BT
Device. (“bt” indicator on the display will stop blinking).
4.
After pairing is complete you may now play music with your external BT Device.
