5
POWER SOURCE
POWER SOURCE (Remote Control)
DC IN
AUX IN
LINE IN
R
L
REAR VIEW
1.
2.
Connect the small plug from the supplied AC/DC Adaptor to the DC 12V Jack on the rear of
unit. Connect the AC/DC Adaptor into any convenient household outlet has AC 100-240V,
50/60Hz as illustrated below. The STANDBY/AUX IN Indicator on the top of unit will
illuminate.
Notes:
1.
The AC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
2.
To save energy, unplug the AC/DC Adaptor from wall outlet if not using the unit for
extended periods.
In first time use, slide the insulation film from the battery tray and discard it as illustrated follows:
When the button cell is consumed, replace it as follows:
1.
Push the tab on the battery tray and slide it out as illustrated below:
2.
Install a new CR 2025 button cell to the battery tray as the polarity makings on the rear of
remote control cabinet.
3.
Close the battery tray.
Summary of Contents for MHT983
Page 1: ......
Page 13: ...LIMITED WARRANTY ...
