10
FM Radio:
1. Power on the unit as previously instructed.
2. Press the SOURCE – LED ON/OFF Button on the unit repeatedly until the STANDBY/FM Indicator is
Or, press the FM Button on the Remote Control to enter FM Radio mode directly, the STANDBY/FM
Indicator will illuminate and blink.
3. Press and hold the
Buttons on the unit or Remote Control to auto
search and plays the previous/next available radio stations.
4. Repeat the same procedure until the desired station s
.
5. If you want
earch the stations from beginning, press the RESET Button on the Remote
Antennas:
This unit has a FM wire antenna, which provides adequate reception in most areas. If reception is weak,
unwound and extended to its full length or reassemble the other direction/location to improve reception.
TUNE -/
or TUNE +/
i ound
f
to res
Control then search through the radio stations again as instructed on Number 3.
illuminated and blink.
