GENERAL OPERATION:
1. Connect the supplied AC/DC Adaptor to the unit and wall outlet as previously instructed.
2. Slide the Power ON/OFF Switch on the rear of unit to turn the unit on to standby mode.
3. Press and hold the Button on the top of unit or press the Button on the Remote Control to
turn the unit ON from standby mode. The corresponding indicator will illuminate.
4. Press the SOURCE -- LED 1 Button on the unit or SOURCE Button on the Remote Control repeatedly
to switch to desired source. The color of the indicator will switch to the corresponding
source (see list below):
Playback Mode:
Color of Indicators:
BT
(Bluetooth)
Blue
(and
blinking)
FM
Radio
Purple
AUX
1
Green
AUX
2
Orange
5. During playback,
Press the VOL (Volume) +/- Buttons on the unit or Remote Control to adjust volume as desired.
Press the /- Buttons on the Remote Control to adjust the treble (high audio frequency)
as desired.
Press the BASS +/- Buttons on the Remote Control to adjust the bass (low audio frequency) as
desired.
Press the (MUTE) Button on the Remote Control to turn off the sound temporarily, press again to
turn it back on.
Press and hold the SOURCE/LED 1 Button on the top of unit to power On/Off all the Decorative
LED Lights.
Press the LED 2 Button on the top of unit to power On/Off the central Decorative LED Lights.
Press the LED ON/OFF Button on the Remote Control repeatedly to turn the Decorative LED Lights on
the speaker and/or central on/off as desired.
6. When finished, press and hold the Button on the unit or press the Button on the Remote Control
to turn the unit to standby mode. The color of the Indicator will turn to red.
7. If unit is not used for a long period of time, power off the unit by slide the POWER ON/OFF Switch on
the rear of unit to OFF position.
(For saving energy, unplug the AC/DC Adaptor from wall outlet).
BT (BLUETOOTH):
OPERATION
Listen music from external BT device:
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Power on the unit as previously instructed.
2. Press the SOURCE – LED 1 Button on the top of unit or the SOURCE Button on the Remote Control
3. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen
4. If pairing is complete you may now play music with your external BT Device.
5. During playback:
Notes:
instructions from the external BT Device. When paired, the blue Indicator will stop blinking.
repeatedly until the color of Indicator turn to blue and blink.
Press the Button on the unit or Button on the Remote Control to pause, press again to resume
normal playback.
Press the TUNE -/
or TUNE +/
Buttons on the unit or Remote Control repeatedly to skip tracks.
When the external BT Device searches for the unit, our model number “MHT828” will appear on the
display of external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
