background image

Remote Control

FIRST TIME USE

● Remove and discard the insulation

as figure on the right.

1. Push and slide out the battery holder as figure 1 below.

2. Replace the

with a new CR2025 button cell as the polarity markings

on the rear of the Remote Control.

3. Close the battery holder.

BATTERY PRECAUTIONS

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment,

a reserved battery may cause damage to the device.

3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc ) or old batteries with

fresh ones.

4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the

batteries to prevent damage or injury from possible leakage.

5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. ( Follow battery

manufacturer’s instructions.)

6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
7. Clean the battery contacts and also those of the device prior to battery installation.

Fig.1

Fig.2

Fig.3

Remote control operation range

● When there is an obstacle between the remote

and the transmitter, the unit may not operate.

● When direct sunlight, an incandescent lamp,

fluorescent lamp or any other strong light

shines on the REMOTE SENSOR of the unit,

the operation of the remote may be unstable.

film

LED 

ON/OFF

LED1

LED2

LED3

LED4

LED5

RED

GREEN

BLUE

16 feet (5M)

7

Replacing the button cell when it is drained:

button cell

8.               This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause 

severe internal burn in just 2 hours and can lead to death.Keep new and used batteries away from 

children. If the battery compartment does not close securely, stop using the product and keep it away 

from children. If you think batteries might have been swallowed or placed inside any part of the body, 

seek immediate medical attention.

Remote Sensor

Summary of Contents for MD699

















Reviews: