40 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to
zero at a tape location you want to refer to later.
01:08 PM
STOP
CH10
SLP
1 : 23 : 45
• The real-time counter memory
will not function during Repeat
Play mode. Details are on page
37.
• You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero
at a second location, the previ-
ous real-time counter to zero
setting will be lost.
Helpful Hints
0 : 00 : 00
M 0 : 00 : 00
1
Play, fast forward, or rewind a tape to the
location that you would like to refer to later.
Stop the tape.
2
Press the STATUS/EXIT button. The real-time
counter will appear on the screen.
3
While the counter remains on the screen,
press the CLEAR button to reset the real-time
counter to zero.
4
While the counter remains on the screen,
press the MEMORY button so that M appears
on the screen. To erase a real-time counter mem-
ory, press the MEMORY button so that the M disap-
pears from the screen.
5
To go to the tape location where you set the
real-time counter to zero, press the
REW(ind)/
s
button or the F.FWD/
B
button
when playback is stopped. When the tape
reaches the point at which you set the counter
to zero, the tape will stop. Press the PLAY/
o
button to watch the tape.
TRACKING
MUTE
REC/OTR
SPEED
MEMORY
0
8
9
7
5
6
4
2
3
1
PAUSE/STILL
ALT.CH
STOP
F.FWD
PLAY
REW
VOL.
STATUS/EXIT
MENU
POWER
SLEEP/WAKE UP
CH.
CLEAR
2
3
4
1,5
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 40
