If R Earbud is using, the Red Indicator on it will turn off.
If L Earbud is using, the blinking frequency of Blue Indicator will slow
down.
(The Red Indicator on the R Earpiece will not light.)
3.
After pairing is complete you may now play music and answer calls with your
external BT Device.
MONO MODE:
BT (Bluetooth) pairing:
To pair R (or L) Earbuds to the BT Device in mono mode for the first time (or repair
to a new BT Device), follow the steps below:
1.
Power on the R (or L) Earbud by pressing the
Button on it.
If R Earbud is using, the Red & Blue Indicators on it will illuminate and
blink.
If L Earbud is using, the Red & Blue Indicators on it will illuminate and
blink.
2.
Power on the external BT Device and enter to BT searching mode. Start pairing
following the on screen instructions from the external BT Device.
3.
After paired,
If R Earbud is using, the Red Indicator on it will turn off.
If L Earbud is using, the Red Indicator on it will turn off.
4.
If pairing is complete you may now play music and answer calls with your
external BT Device.
5.
During playback, you can use the controls on the paired BT Device to adjust
sound level; skip tracks; pausing playback or mute the sound as usual.
6.
If the Earbud is paired to a Cell Phone and a call is incoming during an active
music session. Ringer sound will hearing from the Earbud. Pressing the
Buttonon it then speak to the built-in microphone to answer the call. When your
call is complete, pressing the
Button to disconnect or end the call and resume
to music playback.
7.
When finished listening, pressing and holding the
Button on the Earbud until
Red Indicator is illuminate then release the button to shut off the Earbud.
Summary of Contents for MBH530
Page 1: ......
