16
Finding a passage within a track
1
During playback, press and hold
4
or
¢
.
➜
The CD plays at a high speed.
2
When you recognize the passage you want,
release
4
or
¢
.
➜
Normal playback resumes.
Changing discs
●
Press
DISC CHANGE
(on the remote
control), or
DISC 1/2/3
to select a tray.
Helpful hints:
– Make sure that the disc tray you select is
loaded. It will be no response if an unloaced disc
tray is selected.
Programming tracks
You may store up to 30 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press
PROGRAM
to
activate programming.
➜
PROGRAM
indicator flashes. Display shows
01
, indicating the start of the program.
➜
00
flashes for you to program a track.
2
Press
digits
0 - +10
on remote control or
4
or
¢
to select your desired track. (See
Selecting a different track
)
●
If necessary, press
DISC 1/ 2/ 3
to select a
disc tray.
3
Press
PROGRAM
to store the desired track
number.
➜
Display shows
02
(up to 30 in sequence),
indicating the next program location available.
➜
00
flashes for you to program the next track.
CD Operation
4
Repeat steps
2
to
3
to select and store all
desired tracks in this way.
5
To play your program, press
ÉÅ
.
➜
PROGRAM
indicator lights up.
Helpful hints:
– If you store more than 30 tracks, the display will
show the 1
st
track in the program. At this time, you
can still store a new track, but the new track will
replace the 1
st
track in the program.
– When playback of your program comes to the
stop position, your set will return to normal
playback. To re-enter program mode, press
PROGRAM in the stop position.
Reviewing the program
●
In the stop position, press repeatedly
PROGRAM
to see your stored track numbers.
Helpful hints:
– Display first shows the number of program
location and then, the number of the track stored
here.
Erasing the program
●
You can erase the contents of the memory by:
–
selecting
TUNER
or
TAPE
sound source;
–
in the stop position,
press
PROGRAM
t
o
enter program mode and then, press
Ç
.
➜
PROGRAM
indicator turns off.
Different play modes: REPEAT
You can select and change the play modes
before or during playback, and combine the
modes
or
with PROGRAM.
(lights up)
–
plays current track continuously.
(flashes)
–
repeats current disc/
program.
1
To select play modes, press once or more
REPEAT
.
2
Press
ÉÅ
to start playback if in the stop
position.
3
To return to normal playback, press
REPEAT
repeatedly until the
REPEAT
indictor turns off.
➜
You can also press
Ç
to cancel your play
modes.
01
00
p001-p021_MAS85_21-Eng
5/7/05, 11:49
16
