15
P
OWER
O
N
Select
STANDARD
,
STANDBY
,
FORCED
or
ON
mode. The different modes are as explained below:
STANDARD
: TV will be automatically switched to the last status (
STANBY
or
ON
)
whenever the mains power is turned
ON
or resumed after a power interruption.
STANDBY
: TV will be automatically switched to
STANBY
(even if the last status was
ON
)
whenever the mains power is turned
ON
or resumed after a power interruption.
FORCED
: TV will be automatically switched to
ON
whenever the mains power is turned
ON
or resumed after a power interruption. Note that the remote control
STANDBY
key will no
longer function when TV is set to this mode.
ON
: Similar function as “FORCED” but the remote control
STANDBY
key function is enabled
when TV is set to this mode.
LNA (L
OW
N
OISE
A
MPLIFIER
)
(only for specific models)
Select
OFF
,
ON
or
AUTO
.
If
ON
is selected, the LNA feature in the TV set will always be
applied to incoming signals.
If set to
AUTO
, the TV set will first analyze incoming signals and
apply the LNA feature if necessary.
By default, the LNA setting is
OFF
.
S
TEP
T
UNING
For calling up or changing channels. When this feature is switched
YES
, the TV will respond
immediately to the change of channel upon keying in the first digit. If this feature is switched
NO
, one has to either wait for a few seconds after keying in the first digit or complete keying in
2 digits before TV changes channel.
Note: When an external set-top box is connected to the RJ12 port for IR link, choose either
YES
/
NO
for optimum channel switching performance.
D
IGIT
T
IMEOUT
Selects the digit entry timeout period via digit key entry from 1.0 SEC to 9.9 SEC.
This allows
the response time between the 1st digit entry and the 2nd digit entry to be adjusted when
2-digit entry is needed.
B
LANKING
T
IME
(only for specific models)
Sets the blanking interval between the switching of channels.
The recommended default setting
is 900 to 960ms.
C
HANNEL
D
ISPLAY
Selects the ways of displaying the information for a channel.
The options are:
ALL
(display the
number and label of a channel),
NONE
(do not display any information),
NUMBER
(display
only the number of a channel) and
LABEL
(display only the label of a channel).
K
EYBOARD
L
OCK
To lock TV control keys, select
YES
.
To unlock, select
NO
.
F
REE
P
ROTECTED
Remove
PROTECTION
features for all channels set under
TV SETUP
menu.
All channels
are not protected when select
YES
.
ESP (E
NERGY
S
AVING
P
ROGRAMMABLE
)
This feature selects a time when the TV will automatically turn off.
The TV must remain on
continuously during the period of time you select. If the power is switched off, the ESP timer will
be re-initialised. Highlight
ESP
, then key in the required time with the digit keys. Select 0 if you do
not wish to use this feature. If sleeptimer is selected, it would have priority over ESP time.
p13-20_040106
1/4/06, 9:15 AM
15